NIP
Pollux GigE Series – 01M / 05M Camera
Page
14
of
56 Manual 1.0
2) Select the camera to be edited and click
button.
3) In the pop-up window, you can edit the IP address of the camera.
For Static IP type, you can also edit the subnet mask and default gateway.
Figure 7.
Camera Network Parameters Setting (3)
4) Click OK to save the settings.
3.3
Camera Configuration
Note
: Configure the camera via the control client. There two methods available:
setting via the attribute tree or via the menu bar.
3.3.1
Setting via Attribute Tree
The software can read the XML file of camera attributes and display it in tree
format.
Steps:
1.
Double click the Pollux Controller icon to open the client software.
The main user interface and the description of the client software are shown
in Figure 8 and Table 5.
