145
9
MOTOR
Bearing, radial ball
Cover(D), end
Bearing, radial ball
Cover, end
221W089E
l
Inspection of fitting parts (Hydraulic motor)
2210144
l
Replacing the "Bearing comp.,
sensor"
Sensor
Inspection for damage
4
1
Inspection of spline
4
2
Inspection of ball bearing
4
3
Inspection and adjustment
9- 3.
1. Check the rotor comp. for damage, especially by
burning.
If it is damaged, replace it.
1. Check for wear of spline.
If it is extremely worn, replace it.
1. Check fitting part of the bearing in the "cover, end" and
"cover(D), end".
If loose, replace them.
2210184
Bearing, radial ball
Cover(D), end
Cover, end
Bearing, radial ball
l
Inspection of fitting parts (Traction motor)
2210102
Spline
Rotor comp.
l
Rotor comp. (Traction motor)
2210121
Rotor comp.
Spline
l
Rotor comp. (Hydraulic motor)
9-3-1. Rotor comp. - inspection and replacement
(Traction and Hydraulic motor)
l
When replacing the "bearing comp., sensor",
be very careful not to damage the sensor.
If the sensor is damaged, the motor will not
operate correctly.
l
Because the bearing sensor is very sensitive
for the static electricity, do not touch any
terminals in the connector directly.
CAUTION
https://www.forkliftpdfmanuals.com/
