22
FRONT AXLE (DRIVE)
2
2210060
Front tyre
Front axle
Hub nut
Hub bolt
2210061
l
Hub nut
l
Removing the front tyre
Remove front tyres as follows.
5.
Remove right and left tilt pins that hold tilt cylinders and
mast.
6.
1. Apply chocks to both rear tyres.
2. Loosen hub nuts on the front tyres.
3. Hoist the truck at the top of the mast to float the front
tyres from the ground.
4. Apply rigid stands or wood blocks (20-30 cm height)
under the frame.
5. Remove hub nuts to remove front tyres.
l
Removing the tilt pin
Outer mast
Tilt pin
Tilt cylinder
NOTE
Do not remove nuts, just loosen.
Tightening torque (M12)
[FB10P/14P]
89-108 N
m
{9-11 kgf
m}
Tightening torque (M16)
[FB15P/18P]
216-264 N
m
{22-27 kgf
m}
Tightening torque (M18)
[FB20P-30P]
315-385 N
m
{32-39 kgf
m}
https://www.forkliftpdfmanuals.com/
