19
DRIVING INSTRUCTIONS
Item
Inspection
Drive chain
- Check condition of the drive chain
- Check lubrication of the drive chain and lubricate if necessary
Throttle grip
- Check operation of the throttle grip. It should be able to turn smoothly and be
fully opened and closed
- Inspect condition and free play of the cable
Brake levers
- Check whether the brake levers operate smoothly and lubricate the joints if
necessary
Lights and
instruments
- Inspect operation of the headlight, rear light, brake light, turn signal lights, horn
and panel instruments
If you need assistance on how to perform any of the above-mentioned tasks, do not hesitate to contact
an authorised Nipponia service point.
Starting the Engine
Before starting the engine make sure to raise the side stand. You can rest the motorcycle on the main
stand.
To start the engine, use A or B starting mode:
!
WARNING:
- If any item in the pre-operation inspection list is not functioning properly, have it inspected and repaired before
operating the motorcycle.
