29
SERVICE AND MAINTENANCE
5. Inspect the drain bolt, seal, oil screen spring, oil screen and confirm that they are in good condition.
Then re-assemble them as shown and tighten the drain bolt.
6. Pour 0.9L of new oil into the crankcase from the filling port and then tighten the oil scale plug.
7. Start the engine and run it at idle for several minutes.
8. Switch off the engine.
9. Inspect the oil level. Check for any leakage.
Air cleaner
The air cleaner must be maintained periodically. Especially after driving in a dusty
environment, maintenance must be enhanced.
1. Remove air cleaner fixing bolts.
2. Remove air cleaner tightening bolts (1) and the cover (2). Take the filter element
out (3).
!
ATTENTION:
- After the engine has been running, the oil temperature is high. Exercise care to avoid injury from burning.
- If oil comes into contact with the skin, wash it away with soap or a cleaning agent.
NOTE:
-
Used engine oil must be sent to a collecting/recycling station in a sealed container. Disposing of it in any other
way will pollute the environment.
