19
DRIVING INSTRUCTIONS
Starting the Engine
Before starting the engine make sure to raise the side stand. You can rest the scooter on the main
stand.
1. Turn the main switch to “ ” position
2. Close the throttle completely and do not turn it
3. Press the start button while holding the rear brake lever to start the engine.
NOTE:
-‐ If the engine does not start after pressing the start button for 3-‐4 seconds, turn the throttle grip open a little.
It may make the engine easier to start.
-‐ After long term inactivity periods it may be difficult to start the engine. In such a case, hold the start button a
little more than usual and turn the throttle grip open a little.
-‐ After starting in a cold state, allow the engine to warm up for approx. 3 minutes.
-‐ If the engine does not start with the electric starter, try using the kick starter
!
ATTENTION:
-‐ Always apply the rear brake during engine starting to prevent the scooter from moving forward.
-‐ Release the start button once the engine has started.
-‐ Do not press the start button while the engine is running, as it could cause damage.
