26
SERVICE AND MAINTENANCE
5. Inspect the drain bolt, seal, oil screen spring, oil screen and confirm that they are in good condition.
Then re-‐assemble them as shown and tighten the drain bolt.
6. Pour 0.8L of new oil into the crankcase from the filling port and then tighten the oil scale plug.
7. Start the engine and run it at idle for several minutes.
8. Switch off the engine.
9. Inspect the oil level. Check for any leakage.
Gear (transmission) oil
Use gear oil for four-‐stroke gasoline engines. Recommended oil type: API GL-‐5 SAE 80W/90.
NOTE:
-‐
Used engine oil must be sent to a collecting/recycling station in a sealed container. Disposing of it in any other
way will pollute the environment.
!
ATTENTION:
-‐ After the engine has been running, the oil temperature is high. Exercise care to avoid injury from burning.
-‐ If oil comes into contact with the skin, wash it away with soap or a cleaning agent.
