27
SERVICE AND MAINTENANCE
8. Pour
0.9L
of new oil into the crankcase from the filling port
(6)
and then tighten the oil plug
(7)
.
9. Start the engine and run it at idle for several minutes.
10. Switch off the engine.
11. Inspect the oil level. Check for any leakage.
Gear (transmission) oil
Use gear oil for four-stroke gasoline engines. Recommended oil type: API GL-5 SAE 80W/90.
Gear oil replacement
1. Set the scooter on the centre stand on a level surface.
2. Remove the filling bolt
(1)
and the drain bolt
(2)
.
NOTE:
-
Used engine oil must be sent to a collecting/recycling station in a sealed container. Disposing of it in any other
way will pollute the environment.
!
ATTENTION:
- After the engine has been running, the oil temperature is high. Exercise care to avoid injury from burning.
- If oil comes into contact with the skin, wash it away with soap or a cleaning agent.
