28
1: Drain bolt
2: Filling bolt
SERVICE AND MAINTENANCE
3. It is better to replace the gear oil when the engine is warm, as it
will be easier to drain out the residue of the gear oil.
4. After the gear oil has been drained out completely, clean the
drain
Bolt and tighten it.
5. Pour approx. 100ml of new gear oil.
6. Tighten the filling bolt to prevent the gear oil from flowing out.
7. For a new scooter, replace the gear oil after the first 500 km.
After that, replace every year or every 6000 km.
!
ATTENTION:
- This work should only be done at an authorised Nipponia service point.
- Replace the gear oil while the engine is warm and with the scooter set on a level surface to ensure that the oil
drains out completely.
- Replace the gear oil more frequently than recommended in the following conditions:
1: Frequent use in wet weather
2: Prolonged riding time
3: Riding with a loaded scooter
