Changing Battery
1. Remove Meter from top of test
strip vial by holding the vial
and twisting the Meter ¼ turn
counterclockwise. Lift Meter
from vial top.
2. Turn Meter over until the Meter
label is facing up. Pull Battery
Tray out until battery is exposed.
3. Holding the Battery Tray over
your hand, press on edge of
battery until battery drops out.
4. Insert new battery into Battery
Tray with “+” side facing up. Slide
Battery Tray back into Meter.
5. Turn Meter back over and press
Set Button to turn Meter on.
Note:
If Meter does not turn on, open Battery
Tray and check that the battery was
inserted “+” with the side facing up.
Close Battery Tray and repeat Step 5.
If Meter still does not turn on, call
phone number on the cover of the
Owner’s Booklet for assistance.
Batteries may explode if mishandled. Do
not dispose of battery in fire. Do not take
apart or attempt to recharge battery. Dispose
according to local regulations.
31