Using the [Form Settings] tab, it is possible to register forms in which the [Width] and
[Length] have been freely set. When you wish to print using a size that does not appear
in the pull-down list of [Form Name] in the [Main] tab, the size should be registered in
advance before printing.
Form Name : This selects the form (size) that will be the subject of editing or deletion
from the pull-down list.
Width
: This shows the width size of the form that is displayed in Form Name.
Length
: This shows the length size of the form that is displayed in Form Name.
Add/&Edit… : This displays the dialog box that sets the name and size of the form that will
be used for the printing.
[Method of Registering Forms]
(
1) Input the name of the printing media that is to be registered in [Form Name].
Do not leave any space before and after the "Form name".
There are some unusable letters such as the external characters.
(2) Click on [mm] or [inch] in [Unit] to select the units of the [Width] and [Length] sizes
that are to be registered.
(3) Input the [Width] and [Length] sizes of the printing media to be registered in the
boxes.
(4) Click on [OK].
The registered printing media will be displayed in the [Form Name] pull-down list.
3.4 Method of Using the Printer Driver
• Setting the Form Setting Tab
67
