4.2.1 Cleaning Rubber Roller
This printer has several sets of rubber rollers to ensure high reliability of card
transportation. However, if the rollers are stained because of use of stained cards or
cards coated with special materials, transport error may occur due to reduced
transportation power. Though periodic cleaning of rollers may be performed by users
with a certain level of experience, the following intensive cleaning should be done if
such transportation error occurs.
?
Transport Rollers in Flip Turn Module
?
Open Top Cover and rotate Turn Module so that the rollers
come to the position where the cleaning can be done easily.
?
This operation is done with the green knob in the flip turn module.
?
Press a soft cloth with alcohol to the rollers and rotate them.
?
This operation is done by rotating Green handle located at inside of
side plate.
?
Transport Rollers
?
Open the left cover and insert a soft cloth with alcohol and press against rollers
and rotate them.
?
This operation is done with Cleaning Knob located on the Front
Access Panel.
4.2.2 Applying grease to Pulley Shafts etc.
Plastic rollers used in this Printer is made of self-lubricative plastics.
