(
18
)
Card Jam in the Printing Block
Card JAM. Print
Area 04 Er -
Ad
Er Ad Symptom
Check/Repair
50
**
Card jam error in the
Area04
(
SN4
)
while the
card is transported from
Print Block to Flip Turn
or from Flip Turn to Print
Block.
(
1
)
Check that the card is staying in the
problem area. If no card, go to
(
*b
)
.
(
2a
)
After removing the staying card, check the
motion of PM2,PM3 in the Actuator
Check Mode. If normal, clean the
transport rollers of Flip Turn block and
the Print Block.
(
3a
)
If PM2 and PM3 does not work normally,
check connection and electrical contact of
the harness.
·
ASM-MOTOR
(
4a
)
If the harness connection is normal,
replace the following:
·
PM2
·
PM3
·
PBA-MAIN
(
2b
)
Check reaction of SN4 in the
Sensor Check Mode.
(
3b
)
If SN4 does not react, check connection
and electrical contact of the harness.
·
ASM-SENSOR- B
(
4b
)
If the harness connection is normal,
replace the following:
·
SN4
·
PBA-MAIN
