© 2015 Adolf Nissen Elektrobau GmbH + Co. KG
Construction and function
Variable Message Sign
14
Assignments of keys:
On/Off
Pressing this key (approx. 1 sec.) switches the remote control on/off.
Function keys
F1/F2
This key can be assigned with a picture speed selection
(see menu - setting - speed selection).
Press these keys until the symbolic clock has run down
(approx. 1 sec.).
Lifting/lowering
keys
Pressing one of these keys lifts/lowers the upper warning board
(if available).
Press these keys until the symbolic clock has run down
(approx. 1 sec.).
Warning lamps
on/off
Pressing this key switches the warning lamps on/off (if available).
Press this key until the symbolic clock has run down (approx. 1 sec.).
Picture
selection/
Cursor up
Pressing this key starts the picture selection.
This key is also used for selecting different menus.
Info
Pressing this key opens the information menu. Pressing this key
approx. 1 second switches to the display mode.
Cursor down
This key can be assigned with a picture speed selection
(see menu - setting - speed selection).
Press this key until the symbolic clock has run down (approx. 1 sec.).
Cursor left
This key can be assigned with a picture speed selection
(see menu - setting - speed selection).
Press this key until the symbolic clock has run down (approx. 1 sec.).
Cursor right
This key can be assigned with a picture speed selection
(see menu - setting - speed selection).
Press this key until the symbolic clock has run down (approx. 1 sec.).
Back/
menu end
Pressing this key ends an open menu item.
This key can also be used for a picture speed selection
(see menu - setting - speed selection).
Press this key until the symbolic clock has run down (approx. 1 sec.).
OK/
menu
Pressing this key opens the menu of the remote control.
Selected menu items or programs are confirmed by this key.
Picture selection:
To load a picture:
1. Press
[
]
.
2. Select the requested picture from the display by using the cursor keys
[
]
,
[
]
.
3. Confirm with
[
OK
]
.
4. The picture is loaded.
ATTENTION!
The remote control has an operating temperature of -25° to +85°C.
