© 2015 Adolf Nissen Elektrobau GmbH + Co. KG
Construction and function
Variable Message Sign
22
In the
"Touch"
setting press all four corners of the
touchscreen consecutively after the other in order to readjust
the touchscreen display. Usually this is only necessary the
first time it is put into service! The yellow low voltage
indicator lamp flashes briefly to indicate that the individual
corners have been correctly pressed.
Then press the
[OK]
key to confirm.
In the
"Touch I/0"
setting the function of the touchscreen can be switched on/off. The selected
function is displayed in the info menu
[F1]
.
In the
"Selection"
setting the function of key
[F4]
can be blocked so that only one system can be
operated with the remote control.
Multiple:
Several systems can be operated with one remote control.
Selection of the system with key
[F4]
Single:
Only
one
system can be operated with the remote control.
Key
[F4]
for selection of the system is blocked.
"Automatic switch-off"
of the remote control means that the remote control is switched off to save
energy as soon as the light arrow has been folded down, for example, the battery in the radio remote
control does not charge, or no key has been pressed.
The
"Autom. off"
function and the
[
]
,
[
]
keys can be used to select a runtime of between 15 and
240 minutes (the factory setting is 120 minutes).
Radio link
In this setting a search is made for a Bluetooth connection that is then selected
(Pro-Remote only).
Parameters
Matching the remote control and system to be operated.
These parameters are preset in the factory. The settings menu can only be accessed
by authorised service personnel who enter a PIN.
Restore
parameter
Restore parameter (from Standard-Remote version 7.50)
Reset all parameters of the system to factors settings. Only select this point when the
parameters of the system have been changed by mistake. Choose the setting point
and confirm with
[OK].
Enter the
PIN 1111
with the keys
[S1] - [S4]
and confirm with
[OK].
The factory set parameters are now reloaded and transferred to the system and
the remote control. If this process has been successful the display shows "successful"
if not the message "error" appears. A possible error could be that the version (V 5.10)
used in the control does not support this function or the factory setting has not been
made.
End
Ending the settings menu
The settings menu must always be left via this menu item. The "F2" key must only be
used for cancelling the setting process.
