© 2015 Adolf Nissen Elektrobau GmbH + Co. KG
Transport and storage
Variable Message Sign
25
4
Transport and storage
4.1
Transfer / delivery
Upon arrival immediately check the delivery for completeness and transport damages.
If you register visible transport damages, proceed as described below:
·
Do not accept delivery or only accept it with reservation.
·
Record the scope of damages on the transport documents or on the carrier's note of delivery.
·
Initiate a complaint.
NOTE!
Make a claim for every defect as soon as it is recognised. Claims of damages can only be made within the
applicable warranty period.
4.2
Storage
When not in use store the variable message sign SpeedSign SMD 750 under the following conditions:
·
Do not store outdoors, protect against permanent humidity and condensate.
·
Store dirt and dust free.
·
Do not expose to aggressive media.
·
Protect against intense sun radiation.
·
Avoid long lasting mechanical vibrations.
·
Storage temperature: 15 to 35 °C
·
Relative humidity: maximum 60%
·
For storage longer than 3 months:
·
check the general condition of all parts regularly.
·
If necessary apply, refresh or renew suitable preservation.
·
Regularly charge or remove batteries.
·
Store NiNa Guard always vertically.
ATTENTION!
The variable message sign SpeedSign SMD 750 must be installed and stored vertically!
