© 2015 Adolf Nissen Elektrobau GmbH + Co. KG
Safety
Variable Message Sign
8
2.2.2
Unauthorized persons
WARNING!
Danger to unauthorized persons!
Unauthorized persons who do not fulfil the requirements described here are not aware of the dangers in the
working area.
For this reason:
·
Keep unauthorized persons away from the working area.
·
In case of doubt, speak to these persons and expel them from the working area.
·
Interrupt the work as long as unauthorized persons are present in the working area.
2.3
Personal protective gear
When dealing with SpeedSign SMD 750, especially in public road traffic, personal protective gear must be worn in order to
minimise health hazards.
For this reason:
·
Before all work, properly put on the respective protective gear as described and wear it during the work.
·
It is also essential to follow all signs affixed in the working area regarding personal protective gear.
Recommended protective gear
In addition to the prescribed personal protective gear, it is recommended to wear the following protective gear:
Reflective warning vest
or wear reflective warning clothing in order to be more clearly visible for others. In particular, wear reflective
warning clothing:
·
while working in the vicinity of railway tracks,
·
during maintenance and when securing vehicles on public roads,
·
during roadwork: all personnel who are in the vicinity of public road traffic,
·
when marshalling construction traffic. Dispose the reflective warning clothing after use or have it
professionally cleaned to maintain visibility.
2.4
Designated use
The equipment is designed and constructed exclusively for the intended purpose described here. The variable message sign
SpeedSign SMD 750 is intended for the protection of persons and material and for displaying advance direction signs and
hazard warnings ahead of approved construction sites in public road traffic.
WARNING!
Danger through non-designated use!
Any use that goes beyond the designated use and/or different use of the equipment can lead to dangerous
situations.
For this reason:
·
Only use the equipment as intended
·
Strictly observe all data in these operating instructions.
·
In particular, refrain from the following uses. They are considered as non-designated use:
·
Alteration, conversion or changes to the construction or individual accessory parts with the aim of
changing the application or use of the equipment.
Claims of any type as a result of damage from non-designated use are excluded.
All damage from non-designated use is the sole liability of the operator.
