10
Manual ref: XND-HD-01
CAM341-344 - Fitting The Camera Lens
1
3
2
4
1.
DAMPING-
2.
3.
DRIVE
4.
GND
Auto-Iris Direct Drive Connections
Auto Iris type lenses require the 4-pin connector to be attached
to the camera. In most instances your lens will be pre-wired with
this plug, but if needed on-line
Tip 322
which includes a full
wiring diagram can be found at
www.nitedevil.com
.
C Or CS Mount Lenses
Most lenses are available in 2 different mounting options - C mount
and CS mount.
CS mount lenses are now the most popular size as they are shorter
and more compact than C mount lenses. Most cameras are now
manufactured to accept CS mount lenses. Before fitting the lens you
need to verify that you are using a CS mount lens with the camera.
You can confirm this with your lens supplier or the literature that
came with your lens, check the instructions or packaging to see if
your lens is a C or a CS mount version.
If your lens is a C mount type you can still fit it to the camera. Please
see the on-line
Tip 323
at
www.nitedevil.com
.
Using A CS Mount Lens
If you are using a standard CS mount lens you can screw the
lens straight into the camera without the need for the C-CS
adapter ring (supplied).
