background image

HD-TVI                                                                                       

DOCXSEE870

 

     

SEE870 Multi-Format HD Camera (TVI/AHD/CVI) & Analogue with IRs

 

 

Email: support@kovert.com

                                                                                               

Last Revised 23/03/2017

 

 

                                                                                                  
 
      
 
 
                                                                  
                                                                     

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 

 
Special Features 

The SEE870 cameras produce exceptional quality images using the Sony 1.28" 
IMX291 Exmor CMOS CCD providing HD 1080P resolution.  
 
The SEE870 is a multi-format HD camera with TVI, AHD, CVI and CVBS mode 
selection and in addition a separate analogue output (CVBS) on a separate BNC lead.  
 
In HD-TVI mode the cameras have the Coaxitron Control facility for changing the 
OSD menu specifications via the DVR or remote network connection, or via the 
camera. The motorised lens facility allows zoom and focus control also to be altered 
remotely without the need for site access. 
 
This camera has the NiteDevil menu feature for reducing shutter speed for improving 
light capture at night. 
 
* If you have fitted cameras with IRs and have experienced condensation issues or IR 
flare, then this camera with the flat dual front glass, reduces these problems 
considerably.  

SEE870(B/W) External HD Camera 

The SEE870

 

has multi format HD modes for TVI, AHD and CVI plus a 

separate BNC for CVBS (analogue) use.   
 

 

 

 

In addition the SEE870 comes in two colours, 
Black or Polar White with the following 
features:   
 
2 MegaPixel 1080P/700TVL (CVBS)   
2.8~12mm motorised lens  
2x High Power IRs with up to 40m range  
2 motors driving the zoom & focus and cut    
   filter for True Day/Night  
NiteDevil brand for low light conditions  
Privacy masking & Motion Detection    
Extra deep base for cabling  
Dual front glass for reducing IR flare   
   and all metal construction*. 

 

 

1

Summary of Contents for SEE870


















Reviews: