Warnings
1. The product is designed to be used by adults. Keep the
product out of reach of children.
2. Children under 16 years old must be under adult
supervision when using this product to prevent scalds and
accidents.
3. DO NOT place the product in water.
4. DO NOT put your fingers, metals or foreign matters into the
product to avoid accidents or damage.
5. DO NOT use the product in a confined space.
6. Stop using the product and dispose of it immediately if
there is any leakage, odor, or deformation in the battery.
7. It is recommended to use with NITECORE Li-ion batteries
or others with safety certification.
8. DO NOT expose the product to temperatures above 60°C
(140℉) for a long time.
9. DO NOT disassemble or modify the product without
authorization, as this will cause the warranty to be nullified.
Please check the Warranty Service for details.
10. Please install the Heat Insulation Guard when using the
product to prevent scalds.
11. When using two 21700 Li-ion batteries, please use two with
the same capacity while the voltage difference between
them is less than 0.1V to avoid damage to the battery or
circuit.
Warranty Service
All NITECORE
®
products are warranted for quality. Any DOA /
defective product can be exchanged for a replacement through
a local distributor/dealer within 15 days of purchase. After
that, all defective / malfunctioning NITECORE
®
products can
be repaired free of charge within 12 months from the date
of purchase. Beyond 12 months, the charge for accessories,
replacement parts and delivery shall be at your own expenses.
The warranty will be nullified if
1. the product(s) is/are broken down, reconstructed and/or
modified by unauthorized parties.
2. the product(s) is/are damaged due to improper use.
For the latest information on NITECORE
®
products and services,
please contact a local NITECORE
®
distributor or send an email
to service@nitecore.com
※ The trademarks and product images specified herein this
user manual are for reference purposes only. The copyright
belongs to their lawful holders.
※ All images, texts and statements specified herein this
user manual are for reference purposes only. Should any
discrepancy occur between this manual and information
specified on www.nitecore.com, Sysmax Innovations Co.,
Ltd. reserves the rights to interpret and amend the content
of this document at any time without prior notice.
Worldwide Warranty Service
Model number
Date of purchase
————————————— —————————————
Serial number
Store Stamp
————————————— —————————————
This is the certificate of authenticity if this item and we
confirm that it has been subjected to the most exacting
quality controls by SYSMAX Innovations Co., Ltd.
NOTE:
Please ensure this warranty card is fully completed by the
distributor or retailer after purchasing the product. Should
the product fail to operate correctly during the warranty
period, it may be returned with the completed warranty card
and original sales receipt to the retailer or local distributor
for replacement or repair.
Customer Service Email: service@nitecore.com
SYSMAX Innovations Co., Ltd.
TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: info@nitecore.com
Web: www.nitecore.com
Address
：
Unit 6355, 5/F, No.1021
Gaopu Road, Tianhe District,
Guangzhou, 510653, Guangdong, China
Thanks for purchasing NITECORE!
Made in China
EMR19071022
Please find us on facebook : NITECORE Charger
EMR10
Portable Electronic
Multipurpose Repeller
IMPORTANT
Read all instructions before use.
This product is intended for adult use only. This product is not
a toy.
Product Introduction
The EMR10 is specially designed for outdoor activities, such as
outdoor work, camping, fishing, trekking and more.
Specifications
Input
5V
⎓
2.4A / 9V
⎓
2A (18W MAX)
Output
5V
⎓
2.4A / 9V
⎓
2A / 12V
⎓
1.5A (18W MAX)
Rated Capacity
10,000mAh 36Wh MAX
Ultrasound
Frequency
25kHz, 40kHz
Heating
Temperature
125°C / 257°F MAX
Modes
Indoor Mode: 11ft Protection Zone
Outdoor Mode: 16ft Protection Zone
Dimensions
167mm x 59.5mm x 33.5mm
(6.6" x 2.3" x 1.3")
Weight
149g±5g (5.26oz±0.1oz)
(Accessories Not Included)
Accessories
Heat Insulation Guard, USB-C Charging Cable,
10 x Mosquito Repellent Mats, 2 x 21700
NL2150 5,000mAh Li-ion Batteries (optional)
Powered by
1 or 2 21700 Li-ion Battery(s) to provide a
max runtime of 12h
Waterproof
Rating
IPX5
Battery Installation
1. Slide the Battery Cover Lock Switch on the bottom to open
the battery cover.
2. Ensure the battery(s) is/are inserted with the negative
end towards the spring. The product will not work if the
battery(s) is/are incorrectly inserted.
3. Cover the battery cover and slide the Battery Cover Lock
Switch to lock it.
Charging
Connecting to the External Power
Use the USB cable to connect an external power supply (e.g.
a USB adapter, a power bank or other USB charging device) to
the USB charging port to begin the charging process. (Input:
5V
⎓
2.4A / 9V
⎓
2A)
Note:
The mosquito repelling function and ultrasonic function
can be activated during the charging process.
Operating Instructions
Mosquito Repelling Function
•
On:
When the mosquito repelling function is off, long
press the Mosquito Repelling Button to turn it on, and the
corresponding indicator will turn green.
•
Off:
When the mosquito repelling function is on, long
press the Mosquito Repelling Button to turn it off, and the
corresponding indicator will be off.
•
Mode Switching:
When the mosquito repelling function
is on, short press the Mosquito Repelling Button to switch
between Indoor Mode and Outdoor Mode.
Ultrasonic Function
•
On:
When the ultrasonic function is off, long press the
Ultrasonic Button to turn it on, and the corresponding
indicator will turn green.
•
Off:
When the ultrasonic function is on, long press the
Ultrasonic Button to turn it off, and the corresponding
indicator will be off.
Note:
Humans can barely hear ultrasound (above 20,000Hz).
Lockout / Unlock
•
Lockout:
When both functions are off, double press the
Mosquito Repelling Button to access Lockout Mode. In this
case, the mosquito repelling function and the ultrasonic
function are both unavailable.
•
Unlock:
When the product is in the Lockout Mode, double
press the Mosquito Repelling Button to unlock the mosquito
repelling function and the ultrasonic function.
Hibernation Status
The EMR10 will enter hibernation after 30 seconds if the USB-C
port is not in use while the mosquito repelling function and
ultrasonic function are off. In this case, the OLED display will be
off; press either button to show the remaining battery power.
OLED Real-time Display
•
When the mosquito repelling function or ultrasonic function
is turned on, the OLED display will show the selected
function, selected mode, runtime and more.
•
During the charging process, the OLED display will show the
charging power, battery percentage and more.
•
During the discharging process, the OLED display will show
the output power, runtime and more.
Using the EMR10
1. When the product is off, insert 1 repellent mat into the
Repellent Mat Placement Area.
2. Long press the Mosquito Repelling Button to activate the
mosquito repelling function.
3. The protection zone will be created after 10 minutes.
4. After use, long press the Mosquito Repelling Button to turn
off the mosquito repelling function. Please store the product
after cooling completely.
Note:
NITECORE Mosquito Repellent Mat Size: 34mm x 48mm
/ 1.34" x 1.89" (up to 6 hours each)
Mosquito Repellent Mat Replacement
Make sure the EMR10 is off and cooled. Insert a new repellent
mat while pushing out the used one.
EMR10 Placement
•
Place the EMR10 upwind of the mosquito repellent area if it
is windy.
•
DO NOT cover the EMR10 during the using process.
•
It is recommended to use multiple EMR10 together to create
a larger protection zone.
Charging the External Device
USB Output:
Available with the USB output, the EMR10 can be
used as a power supply to charge external devices.
Connecting to the External Device:
Use the USB cable to
connect an external USB device to the USB charging port to
begin the charging process.
Note:
During the discharging process, the USB output will be
automatically off to protect the battery if the battery voltage is
low.
Storage and Transportation
•
Store the product in ventilated and dry places at room
temperature.
•
The battery should be removed to store separately when left
unused for a long time.
