2
NL50_NL100 Man.Ver 1.0_2_2018
LIST OF CONTENTS
ITEM
DESCRIPTION
A
Power Supply
B
Mounting Screw
C
Thumb Wheel
D
Light
TESTING LIGHT FUNCTION
IMPORTANT:
This is a quick ON and OFF test to ensure the light is operational prior to installing the
light. The light should not be operated out of water for any extended period of time.
1. Connect the power supply to the light by aligning the end of the cord with the socket on the power supply and
securing the threaded collar until it is hand tight (Fig. 1 and 2).
2. Plug the light into a GFCI protected outlet.
3. Press and release the button on the power supply (Fig 3). The light should illuminate.
4. Once the light has turned on, press and release the button on the power supply to turn the light off.
5. Unplug the cord from the GFCI outlet.
NOTE: If the light does not turn ON, proceed to the TROUBLESHOOTING section of this manual.
FIGURE 1
FIGURE 2
FIGURE 3
