EN © 2022 NITEO TOOLS. All rights reserved.
Battery compressor
22
NITEO TOOLS
BOTTOM OF THE DEVICE
8. USE
BEFORE THE FIRST START
All installation, disassembly, cleaning and maintenance operations should
be carried out only when the appliance is switched off.
Unpack the device. Check whether any of the components are damaged and
if the set is complete. Before installation, lay all the necessary components on
a flat surface.
CHARGING THE BATTERY
The battery should be fully charged before the first use of product. Several
charging and discharging cycles may be necessary to achieve full battery
capacity.
Avoid excessive battery discharge. This can damage the battery or shorten
its service life.
The device can heat up during charging. It is a regular occurrence and
should not affect the stability or performance of the device. Do not leave
the device to be charged unattended as this may result in fire, damage to the device
or its surroundings etc.
microUSB
connector
Connector
DC 5.5x2.1 mm
Connector
polarization