32
4 . For easier cleaning and maintenance, the gun can be divided into two
parts. To do this, press the button (7) and pull the right part of the gun
with the nozzle and the tank to the right .
5 . To connect the two parts of the gun, insert part of the gun with the
nozzle and tank into the gun part with the handle until you hear the
characteristic clicking sound.
7.4 Spraying
1 .
Fill the fluid tank with suitably thinned and filtered paint.
2 .
Connect the device to the mains supplying alternating current with
parameters as specified in this manual and on the data plate of the
device .
3 .
Place the compressor on the floor or transport it over the shoulder
using the supplied strap . When using the belt, make sure that the two
hooks are attached to the two hooks on the counter-side sides of the
compressor carrying handle .
4 .
Adjust the suction tube depending on whether fluid will be sprayed onto
a surface below (a) or above (b) the spray gun, so as to ensure continuous
inflow of the fluid.
7
Summary of Contents for SG0158-18
Page 20: ...20 14 Deklaracja zgodno ci...
Page 40: ...40...
