NITO N1e, User Manual

1. Set maximum speed

General Setting

Wait until the scooter has been on for 5 seconds, then hold 

 and 

 buttons 

at the same time. This will make the maximum riding speed (MXS) flash.  
Press 

 or 

 button to set the maximum riding speed. (Default is 20 km/h). 

Press 

 button to go to the next settings page.

2. Wheel diameter settings

Wheel diameter is the second settings screen (after maximum speed). 
Wheel diameter specifications will flash when selected.  
Press 

 or 

 button to select the desired wheel diameter. 

Range options include: 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 700c and 28 
inches. Press 

 button to go to the next settings page.

3. Set units

Display

Metric

Standard

Speed

KM/H

MPH

Mileage

KM

MiL

Environment temperature

°C

°F

Units is the third settings screen (after wheel diameter). KM/H and KM will flash.  
Press 

 or 

 button to select the desired units of speed, mileage and temperature.  

Units will stop flashing once the selection has been made. 

Press 

 button again to return to the maximum speed settings page. 

Hold 

 button to exit the settings screen. Your changes will be saved upon exiting.

4. Exit from any settings page.

You can exit from any settings page by holding 

 button. This will save any settings that have been updated.  

If any settings page has been inactive for more than 1 minute, it will automatically close and return to 
display 1. In the event of automatic closure, any updated settings will not be saved.

18

19

N1

e

 - USER M

ANU

AL

NIT

O ELEC

TRIC KICK SCOO

TER