www.nitronic.ch
-
31 -
Nitronic AG
Mattenstrasse 11
CH – 2555 Bruegg
Tel.
+41 32 373 7070
Switzerland
Fax
+41 32 373 70
75
Program Step
Selecting
and Entering
Select the diameter 3.0.
The blades together with the centralizers move
to the
previously set diameter, i.e. 3.00 mm.
•
Push the two stripping blades carefully until their cutting
edges contact the adjusting pin (16) and slightly tighten
the set screws (10) of the stripping blades (12).
Program Step
Selecting
and Entering
Fig. 12. Centering of the strip-
ping blades using the adjusting
pin