www.nitronic.ch
-
6 -
Nitronic AG
Mattenstrasse 11
CH – 2555 Bruegg
Tel.
+41 32 373 7070
Switzerland
Fax
+41 32 373 70
75
Machine Description
The microprocessor controlled coaxial cable stripping machine ST730T is designed to
strip wires and coaxial cables up to 7 mm outer diameter and strip lengths up to 30 mm in
up to 9 steps. Even single insulated wires can be processed accurately. The ST730T is
capable of storing up to 999 programs. Cable parameters can easily be stored and re-
called at any time.
Following a brief summary of the machine features:
•
The operations of the 9 stripping steps can be done in a single fixation. This increases the pro-
cessing speed and saves time.
•
High reproducibility of the strip length when properly handled.
•
Different wire diameters can be processed without any mechanical settings.
•
Stripping and corrective values can be directly set and stored.
•
Any stored stripping parameters can be selected and will remain in memory even in the event of
blade changes or power failures.
•
The stripping diameters can be precisely adjusted with an accuracy of up to 1/1000 mm.
•
The ST730
T
is easy to operate and enables the user to be familiar with the process within a few
minutes.
•
The precision of all components together with the microprocessor control assure the highest
process reproducibility.
•
The RS 232 interface makes the ST730
T
compatible with various peripheral devices.
Unpacking the ST730T
•
Take the ST730
T
out of the package
carefully
and remove the packing material.
•
The packaging should be kept for future handling purposes.
•
In case the ST730
T
is to be shipped by post than the transportation locks (foamed plastic (1)
between the stripping head
(
5
)
and the clamping jaws (4)) must be in place (Fig. 2, page 11).
