3.
Now you will need to choose a location for a master arming switch. This can be
anywhere that is easily accessible and so that it does not interfere with any
mechanical linkages
4.
Install the .009 jet into the push-to-connect jet fitting and thread into solenoid
outlet port. Tighten snugly, but do not over tighten. Install the 3an Swivel fitting
into the inlet port of the solenoid. This will allow for mounting the nitrous solenoid
directly to the bottle valve.
5.
Mount the nitrous bottle using the supplied hardware. Be sure the bottle does not
interfere with any mechanical linkages.
