3. The bike should be parked in a dry and ventilated place. Do not rinse the bike with water. It is
recommended to wipe it with a cloth.
4. Please comply with local laws or regulations: Please slow down and increase the braking distance in
rainy/ snowy weather or on slippery roads to sure the safety.
5. Non-professional maintenance persons are prohibited from disassembling and replacing parts.
6. The bike is forbidden to do stunt riding.
7. Please inspect and sure all screws are tight before riding.
8. The controller is equipped with an overload protection function. It will cut off the power automatically
once overloaded. And when the power turns to normal, the power will turn on.
9.
If the bike does not react to throttle input despite being turned on, please turn it off
to avoid component damage.
10. Please turn off the power when you get down from the bike or when you are pushing it
to prevent
unintentional throttle input.
11. Never operate the bike if side cover and chain cover are not installed.
Do not allow hands, feet, body, clothing or other similar items to come in contact with any rotating or
moving parts.
Vehicle Structure
1. Front wheel 2. Tire 3. Front fork 4. Braking cable 5. Left brake lever 6. Stem 7. Frame
8. Saddle 9. Seat post 10. Seat post release 11. Inner tube 12. Rear wheel 13. Adjustment
14. Rear drum brake 15. Deck 16. Battery 17. Charger port 18. Side cover
19.On/off switch 20. Grip 21. Handlebar 22. Thumb throttle 23. Chain cover
