Release Notes for Software Version 1.08
Issue 1-0
27
Changes and Additions in the System Configuration Management
Program (cont’d)
System Options
The following descriptions are changes and additions to the System
Options portion of the System Configuration Management Program.
Instructions are provided for accessing the System Options. After these
instructions, each new or changed System Option is listed and
described. The description for the changed System Options includes
only an explanation of the revision. Complete details for the field is
found in Part II: The System Configuration Management Program
in the NVM-2 Release Notes (P/N 17690UPG01 or higher).
In addition, each description for the new or changed System Option
includes the default value and possible entries that you can make.
To change System Options in the System Configuration
Management Program:
1.
Connect a laptop to the Voice Mail. For instructions, see page 9.
Start up the System Configuration Management Program.
For instructions, see page 15.
The Main Menu for your phone system will be displayed. The
following is an example of the Main Menu:
Selected system Type: Portrait
Enter To view / modify
-------------------------------------
O ... system Options
R ... poRt Options
G ... Global parameters
C ... Channel parameters
P ... call Processing parameters
T
... Tone table
M ... Mailbox Range Setup
Q ... Quit
>:
2.
Press O (system Options) from the Main Menu, and then press
<Enter>.
3.
You see the field for each System Option. Press <Enter> until
you see the desired field you wish to edit.
4.
Enter the desired value (changes/additions are described in the
following paragraphs). Press <Enter>.
When you reach the last field and press <Enter>, you return to the
Main Menu for the System Configuration Management Program.
5.
If you are finished programming the System Configuration
Management Program:
•
Press Q and <Enter>.
•
At the DOS prompt, enter VM and press <Enter> to start the
Voice Mail.
Summary of Contents for NVM-2e
