12
EN
5 Preparation
Attaching a bit
WARNING
z
z
Before attaching or detaching a bit, always turn OFF the power.
1
Insert a bit while pulling the sleeve
Sleeve
2
Release the sleeve and make sure the bit does not
come off
To remove the bit, pull out the bit while pulling the sleeve.
We provide all types of bits. For details, please see the General Catalog.
In addition, aside from our Company's bits, you can also use bits available on the market with the specifications below.
23 (0.9")
9 (0.35")
6.35 (0.25")
CAUTION
z
z
If the screws and bits do not match, it could lead to wear on the bits and scratches on the screw heads.
Use bits that match the screw heads.
z
z
If using a long bit, use caution since bit vibration could increase or excess stress be applied.
Attaching the suspension bail
CAUTION
z
z
If the suspension bail is pulled forcefully, it may not return to original status. Use an appropriate strength
necessary for attachment or removal.
1
Lightly pull both sides of the suspension bail and fit it into the hole
TV07783-1_DLV10C_en.indb 12
2017/06/27 17:41:34
