4
*Use the screwdrivers in combination with the following special controllers.
Controller: DLC16S-WGB / DLC16S-WGB
*L
pA
：
A-weighted surface sound pressure level
*L
WA
：
A-weighted sound power level
CONTROLLER
MODEL
DLC16S-WGB
DLC16S-WUB
Power supply
Input
100
to
240 V AC 50/60 Hz
Output
20
to
30V DC
Mass
0.38 kg / 0.84 lbs
Shape of Plug
Europe
U.S.A.
Standard
CE
UL
Screwdrivers and Controller are common to this item
Temperature
Range
Operating
-5
to
+50 °C
23 to 122 °F
Storage
-20
to
+70 °C
-4 to 158 °F
Relative Humidity
Free of Dew (include time of the Storage)
Operating Environment
less than 2000m (6557 ft) above sea level
Pollution Degree
degree 3 according to IEC60664-1
Over Voltage Category
category II according to IEC60664-1
・
Grounding
The tool should be grounded while in use to protect the operator from electric shock. The tool is
equipped with a thee-conductor cord and thee-prong grounding-type plug to fit the proper
grounding-type receptacle. The green (or green and yellow) conductor in the cord is the grounding
wire. Never connect the green (or green and yellow) wire to a live terminal. If your unit is for use on
less than 150V, it has a plug that looks like that shown in Figure A. An adapter (see Figure B) is
available for connecting Figure A-type plugs to 2-prong receptacles. The green colored rigid
grounding strap must be connected to a permanent ground such as to a properly grounded outlet box
as shown in Figure C.
WARNING
For safe use of adapters, the outlet box must be grounded. If there is any doubt, have a qualified
electrician check connections.
Use only 3-wire extension cords that have 3-prong grounding type plugs and 3 pole receptacles that
accept the plug. Replace or repair damaged cords.
