10
EN
Product Specific Safety Rules
WARNING
Protect your body from chips.
During grinding, hot chips scatter. Since it could cause blindness, respiratory disorders, burns or hearing
impairment, when working, to protect your body use protective eyewear, a dust mask, earplugs, gloves
(excluding knitted gloves), long-sleeved work clothes, etc. In addition, do not bring your face close to the tool.
Do not use a Grinding Wheel with an allowable rotational speed (indicated on the Grinding Wheel top label)
lower than the actual rotational speed of the machine. Also, please make sure that the specified dimensions of
the Grinding Wheel conform to the specifications of this machine.
When attaching the Grinding Wheel, check that there are no abnormalities such as cracking, chipping, or
excessive wear.
Do not use the tool if there is a slight abnormality such as a Grinding Wheel containing moisture, damage, loss,
etc. of the display label.
Use our genuine Outer Flange.
Do not use Outer Flanges that are damaged, bent or severely worn out.
Also, do not use a substitute flange or flat washer.
Check that the Grinding Wheel is suitable for the Outer Flange.
Tighten the Grinding Wheel moderately.
When aligning the Grinding Wheel to the Outer Flange do not use a reduced bushing unless the bushing to be
used is supplied from the parts maker or is as specified.
When attaching the Grinding Wheel, make sure that the label on the top of the Grinding Wheel comes into
contact with the mounting surface of the Spindle.
For the label on top of the Grinding Wheel, use one with the same diameter as the outer diameter of the end face
of the Spindle, or larger.
Precautions on Use
TQ15277-0̲MYG-70̲en.indb 10
2017/08/07 13:23:45
