background image

1

The following Safety notations are used throughout the manual to highlight safety precautions for the user and for 

the tool.

Warning:

Indicates a potentially hazardous situation which, if not avoided by following the 
instructions given, could result in death or serious injury.

Caution:

Indicates a potentially hazardous situation which, if not avoided by following the 
instructions given, could result in injury or material damage.

Please note, however, that failure to observe safety precautions under the “

Caution

” category could result in a 

serious occurrence depending on the situation: please observe all safety precautions in the manual. 

Caution

:  Important precautions for tool setup, operation and maintenance.

Thank you very much for your purchase of this 

Nitto Kohki product. 

Before using your tool, please read this manual 

carefully so that you may use it properly to get 

the most out of it.

Please keep the manual handy - so you can 

use it whenever necessary.

 

English

 : 

 

Please ask your dealer or 
distributor for instruction manual 
in local language(s).

 

German

 : 

 

Bitte fragen Sie lhren Händler 
nach eine Betriebsanleitung in 
Landessprache.

 

French

 : 

 

S'il vous plait, veuillez demandez 
á votre foumisseur de manuel 
instruction en langue locale.

 

Spanish

 : 

 

Por favor, cantacte con su 
distribuidor para el manual de 
instrucciones en español.

 

Portuguese

 :  Por favor pessa  ao seo agente 

ou distribuidor o manual de 
instrucces ih linguagen local.

 

Italian

 : 

 

Per Manuale Istruzioni in lingua 
locale Vi preghiamo di rivolgervi 
al rivenditore o distributore.

 

Dutch

 : 

 

Vraag uw handelaar 
om een nederladstalige 
gebruiksaanwijzing.

 

Swedish

 : 

 

Be er lokala Åtreförsäljare eller 
distributör om manualer pá 
svenska.

 

Danish

 : 

 

Venligst henvend Dem til den 
danske distributør for instructions 
manualer.

 

Polish

 : 

 

Prosze pytac swojego dealera 
lub dystrybutora o  instrukcje 
obslugi w jezyku localnym.

 

中文

 

:  請向當地供應商或経銷商詢問中

文使用説明書

CONTENTS page

IMPORTANT SAFETY INSTRUCTIONS  …………………… 2

GENERAL: TOOLS  …………………………………………… 2

GENERAL: POWER TOOLS   ……………………………… 3

INSTRUCTIONS FOR THIS TOOL   ………………………… 4

  1. USAGE   …………………………………………………… 4

  2. CHECK THE CONTENTS OF THE PACKAGE   ……… 4

  3. NAME OF PARTS   ……………………………………… 4

  4. PREPARATIONS  ………………………………………… 4

  5. HOW TO OPERATE THE TOOL   ……………………… 5

  6. HOW TO REPLACE INDEXABLE INSERT  …………… 8

  7. MAINTENANCE AND INSPECTION  …………………… 8

  8. CONDITION FOR USE   ………………………………… 9

  9. ORDERING SERVICE PARTS   ………………………… 9

10. OPTIONAL PARTS   ……………………………………… 9

11. EXPLODED DIAGRAM : EMB-0307B  ……………… 10

PICTOGRAM

           Warning: It might be dangerous to operate the tool if 

the instructions supplied are not followed.

           Using this tool improperly could result in serious injury. 

Read the instruction manual before use.

           Always wear suitable eye protection.

           Always wear suitable hearing protection.

           Always wear respiratory protective equipment (PPE).

           Always wear protective gloves for protection of hands 

from vibration, Shock and Burns.

Storage Temperature  : -10℃ - 60℃ (no freezing)

Storage Humidity 

: Maximum 90% at 25℃ (no dewing)

Operating Temperature : 5℃ - 40℃

Operating Humidity 

: Maximum 90% at 25℃ (no dewing)

Altitude 

: 1000m Max.

Over-voltage Category  : Category Ⅱ according to IEC60664-1

Pollution Degree 

: Degree 3 according to IEC60664-1

Summary of Contents for EMB-0307B















Reviews: