07
06
Secure the scooter neck tube and
open the kickstand.
01
03
02
Confirm that the device will power on
and off after assembly.
04
Confirm that the kick scooter is powered off, then hold the vertical tube, open the folding wrench, align it to the position
of the mudguard hook, and finally hook the hook under the dashboard to the rear end of the body. Press the buckle
button on the mudguard when opening. After the hook under the dashboard is separated from the folding buckle,
straighten the vertical tube to lock the folded plate and then turn the folding wrench back.
Folding
Installation Guide
Body assembly
Folding and handling
Connect the handlebar to the main line connector
of the vertical tube, and install the handlebar to
the vertical tube .
Lock the screws on both sides alternately with the
hexagon wrench in the packaging box (tightening
torque: 4~5N*m), that is, the assembly is completed.
