background image

 

10    Maintenance and Care 

Vehicle cleaning   

Wipe the main frame with a soft wet cloth. If buildup is formed and is hard to be cleaned, you can apply toothpaste and rub with a toothbrush repeatedly, and then 

remove residue with a soft wet cloth.   

Do not clean your scooter with alcohol, gasoline, kerosene or other corrosive and volatile solvents. These substances may damage the appearance and internal 

structure of the vehicle body. Do not spray the scooter with pressure water guns or water pipes. Before cleaning, make sure that the scooter is in shut-down state, 

non-charging state, and the charging port has been buckled tightly, otherwise damage may be caused to electric parts by water leaking.   

 

 

Vehicle storage method   

 

Accessories and any additional items which are not approved by the manufacturer shall not be used. 

 

Please store the vehicle in a flat, stable, well-ventilated and dry place.   

 

Prolonged exposure to UV rays, rain and the elements may damage the enclosure materials, store indoors when not in use. 

 

For a long storage period, keep the battery power between 30%-70% and recharge it every two months to extend the battery life. 

 

After long-term storage, please fully charge the battery before use and check the tire pressure. 

 

Do not charge when the charging port or charging cable is wet. 

 

If any abnormal sound and noise are caused during riding or pushing, do not ride. Carefully check the source of the abnormal sound and noise before riding 

again. 

 

Do not use other models or brands of battery packs, otherwise there may be a potential safety risk. 

 

Please charge the battery with the original charger, otherwise the battery will be damaged or in danger of ignition or explosion. 

 

Do not touch the battery contacts, and do not open or expose the shell. Avoid short circuit caused by metal objects contacting the battery contact, otherwise 

battery damage or personal casualty may be caused. 

 

Do not store the vehicle near a heat source, otherwise it may cause battery failure, overheating, and even fire risk; If the battery is damaged or water enters the 

battery compartment, it is prohibited to charge or continue using the battery. 

Summary of Contents for KQi3 Series























Reviews: