16
15
Turn the steering handlebar to the left, then push the key inward and turn it anticlockwise to
LOCK position.
Unlock Button
Locating Button
Lock Button
Start the Scooter
Locking Steering Handlebar
The scooter can only be locked when the scooter is turned off. Press the Lock Button on the
Remote Controller within an effective distance to turn on the Alarm. The Turn Signal Indicators
will stay on for 2 seconds after the scooter is properly locked.
Locking with Remote Controller
Press the Locating Button and the Turn Signal Indicators will flash for 10 seconds. If no further
operation during this period, the Alarm will be on for 10 seconds. The Alarm can be cancelled
by pressing the Unlock or Lock Button.
Locating
Key
Remote Controller
Step 1
Step 2
Step 3
Step 4
Press the Unlock button of the remote controller. After the Turn Signal Indicators flash
twice, the scooter is unlocked.
After the scooter is unlocked, insert the key into the Keyhole and turn clockwise to
position.
After system diagnostic, hold the brake and press the Start Button for 2 seconds.
The indicator will light up. Release the brake and the scooter will be ready to go.
Summary of Contents for NQi GTS
Page 1: ...USER MANUAL V 1 0...
