niu NQi GTS, User Manual

Safety Notice

Installation Guide

Using a helmet and protective goggles is strongly advised.
You are advised to take proper training or exercise before using on open roads.
Please follow the Operation Guide (P.12) to fully understand how to properly operate the 
scooter.
It should be noted that the braking distance in bad weather will be much longer. Please avoid 
braking on paint markers, manhole covers, and oil stains to prevent slipping. Pay extra 
attention when riding through railway crossings, junctions, tunnels, and bridges. Slow down 
if road conditions are unclear.
Do not use high beam indiscriminately. Continuous use of high beam may disturb the vision 
of other drivers and pedestrians.
Do not use mobile phones or other electronic devices which may draw your attention while 
riding.
Do not change the lane without signaling. Changing the lane at will is one of the major 
causes for accidents. When you need to change the lane, remember to switch on the Turn 
Signal Indicator first. Always check the vehicles approaching from behind before changing 
the lane.

04

03

Insert the key to the main lock and turn to the icon 
of "OPEN" as shown in the left figure.

Step 1

Open the saddle to take out the key box, windshield 
package (with rubber pads and standard parts), 
and installation tools.

Insert the key into the keyhole in the rear storage 
and turn it to open the battery compartment. Take 
out the charger and rearview mirrors package 
inside.

Step 2