06
05
Adjust the rearview mirrors to an appropriate
position and then tighten nuts on the rearview
mirror with a spanner. Properly set the dust cover.
Install the right rearview mirror in the same way.
Step 4
Align the windshield rubber part with the
windshield holes and then install it.
Tighten the two screws with the screwdriver to
secure the windshield.
Step 5
Step 6
Downloading the APP
Step 1
Step 2
Step 3
Functions such as checking battery level, locating, and management can be implemented on the
electric scooter through the app.
NOTE:
The mobile phone system is required to be at least Android 4.0 or iOS 8. Make sure that the
mobile phone has been connected to the Internet when running the app (Wi-Fi / 2G / 3G / 4G).
Scan the QR code below to download the APP
titled Niu E-Scooter.
Run Setup after downloading and register.
Please scan the QR code on the inside of cover
page for app registration.
Take out the rearview mirrors and check them
carefully. Install the left rearview mirror into the
mounting hole on the left brake lever and turn it
clockwise. The bolt shall be screwed in for more
than 15 mm.
Step 3
Summary of Contents for NQi GTS
Page 1: ...USER MANUAL V 1 0...
