6
that the faster the head rotates, the energy consumption is greater
3) Select the inclination in axis (X, Y)
- Use the button to select the direction of the inclination (X or Y axis). Plane can be tilted up to ±
8%
4) laser inclination mode switch (device automatically switches to manual mode)
5) movement alarm mode (TILT)
- The laser is able to secure. While the device is moved, placed in another place (which can
cause incorrect measurements) – it turns off (system beeps). In such a situation, turn off and on
laser level again (or turn off the TILT by holding longer the button 5)
6) directional scan button - narrowing of the laser line in the required range (where the work is
carried out)
- available display of beam angles: 0-10 ° -45 ° -90 ° -180 °. Each press will switch the display
of the beam angle.
7) MINUS / right rotation
- Use the key to: subtract the value of inclination (minus) / heads turn to the right (when the
head is not spinning or level is switched into scan mode)
8) PLUS / counter-clockwise rotation
- Use the key to: add the value of inclination (plus) / turn heads left
WORKING WITH LASER LEVEL
Turning on the power
On the front panel press button 1. The instrument will level by itself and the power LED lights
up. Press the button again to turn off the power.
Once leveled up, the laser LED stops blinking and the laser head rotates at a speed of 600 rpm.
If instrument will be is set inclined more than ± 5 °, it won't level by itself.
Rotating laser head mode
button 2 allows you to adjust the speed of laser head rotation. Switching the speed is carried out
by pressing again this button
Scan mode
Adjust the rotating speed of the head. Press button 6 which will cause the device goes into scan
mode, the laser will begin to "draw" a line at set distatnce. Each time when you press this button
you will cause increase the range of "drawn" line. Depending on your needs, switch the direction
of rotation of the head (clockwise or counter-clockwise).
