D. Line Selection
(attention: model CL2D
– has 1 x H and 1 x V laser surface)
Line Selection: By pressing Line Selection Button at the keypad panel can make a
various change/collocation of laser lines. The sequence of it is as below:
Laser will be switched on with H laser.
Press Line Selection Button for one time, V1 laser will be on.
Press Line Selection Button for two times, Both V1 & V2 laser will be on.
Press Line Selection Button for three times, All the three laser lines including H, V1 &
V2 will be on simultaneously
Press Line Selection Button for four times, it will turn back to first sequence of the
laser.
Battery:
This device can be used for AA alkaline batteries(1.5V) and lithium batteries.
Charger:
Lithium battery can be charged when not use. Put it onto the charge box that comes
with the kit and connect it with power adaptor to charge the battery.
Time to full charge the battery:3-4hours.
Battery capacity: 2600mAh.
LED indicator at charge box:
Red: In Charging. Green: Full Charged.
Winking with red: Wrong connecting.
