23
Table 5.
Parameters inquiring
Item
Description
Graphic
Output
Display the output voltage and output
frequency of the UPS. As the following
graphic shows, the output voltage is 120v &
the output frequency is 50Hz.
Load
Display the numerical value of the active
power (WATT) and apparent power (VA) of
the load. For example, as the following
graphics show: the WATT of the load is
100w, VA is 100VA (when disconnect load, it
is a normal phenomenon to show a small
numerical value of WATT and VA).
Temperature
Display the temperature of the inverter in
the UPS. As the following graphics show:
the temperature of the inverter is 37℃.
Input
Display the voltage and frequency of the
input. As the following graphics shown: the
input voltage is 120v, input frequency is
49.8Hz.
Battery
Display the voltage and capacity of the
battery . As the following graphics shown:
the battery voltage is 38v, the capacity of
battery is 100％(the capacity of battery is
approximately reckoned according to the
battery voltage).
Battery
remaining time
Display the battery remaining time when
under battery mode. The number is from 0
to 999 minutes. As the following graphics
shown: there are 686 minutes left for
discharging.
