Product description
Ex-Separator Module iXT0 - rev. 02 / 28.08.2017
page 19
9 Equipment
9.1
Delivery
The standard delivery of the iXT0 contains:
−
One Ex-Separator Module iXT0 - according to delivery note
−
Technical Instruction with the EC Declaration of Conformity and approvals -
where all necessary steps to correctly install and to operate the iXT0 are
listed
Check additional accessories depending on your order and by using the delivery
note.
9.2
Receipt
Check the delivery according to the delivery note for completeness and intactness
immediately after receipt. Report any damage in transit to the carrier instantly.
Send an immediate, written report to NIVUS GmbH in Eppingen as well.
Incomplete delivery shall be directly reported to the headquarters in Eppingen or
your local distributor in written form within two weeks.
Note
Mistakes cannot be rectified later.
9.3
Transport
Protect the iXT0 from shock and impact loads and vibrations. The transportation
must be carried out in the original packaging.
9.4
Return
The units must be returned at customer cost to NIVUS Eppingen in the original
packaging free of charge.
Returns with insufficient postage will not be accepted.
9.5
Installation of spare parts and parts subject to wear and
tear
We herewith particularly emphasize that replacement parts or accessories, which
are not supplied by us, are not certified by us, too. Hence, the installation and/or
the use of such products may possibly be detrimental to the device’s ability to
work.
Damages caused by using non-original parts and non-original accessories are left
at user’s risk.
