Maintenance and cleaning
Ex-Separator Module iXT0 - rev. 02 / 28.08.2017
page 37
Maintenance and cleaning
15 Maintenance, material wear and cleaning
Disconnect instrument from mains
Disconnect the instrument from power supply before you begin to
execute maintenance, cleaning and/or repair works. Repair works
shall be executed solely by expert personnel.
Disregarding may lead to electrical shocks.
The iXT0 is designed to be virtually maintenance-free and free of material wear.
If required clean the enclosure with a dry antistatic cloth.
Do not use any abrasive cleansing agents.
16 Dismantling/disposal
Improper disposal may be harmful to the environment.
Always dispose equipment components and packaging materials according to ap-
plicable local regulations on environmental standards for electronic products.
−
Disconnect the iXT0 from mains power.
−
Use appropriate tools to remove the connected cables of the iXT0.
−
Remove the iXT0 from the DIN rail.
EC WEEE-Directive
This symbol indicates that the Directive 2012/19/EU on waste
electrical and electronic equipment requirements shall be observed
on the disposal of the equipment.
17 Emergency
In case of emergency press the
emergency-off button
of the main system.
