3 Safety Instructions
NivuLink Compact - Document revision 02 / 06.08.2020
page 15
CAUTION
Risk of equipment damage
The units are not resistant to substances having seeping and insulating properties such as
aerosols, silicones and triglycerides (as found in some hand creams).
•
If you cannot be sure that such substances are likely to occur in the environment of
the device: install the unit into a housing that is resistant to the above substances.
•
Use clean tools and materials when handling the device.
CAUTION
Risk of equipment damage
due to incorrect cleaning.
•
Clean enclosure and dirty contacts with propanol.
•
Do not use contact spray since the spray may impair contact area functionality in
connection with contamination.
CAUTION
Risk of malfunctions
Contact spray may impair contact area functionality in connection with contamination.
•
Do not use contact spray.
CAUTION
Risk of equipment damage
due to reverse polarity of data lines and power lines.
•
Avoid reverse polarity.
CAUTION
Risk of equipment damage
due to electrostatic discharge. Electronic components are integrated in the devices which
may be destroyed when being touched as a result of electrostatic discharge.
•
Observe the safety precautions against electrostatic discharge according to
DIN EN 61340-5-1/-3.
•
Observe properly earthed environment (persons, workplace and packaging) when
handling the device.
Commissioning to be carried out only by qualified personnel
The entire measurement system shall be installed and put into operation by trained expert
personnel only.
