7 Mounting
NivuLink Compact - Document revision 02 / 06.08.2020
page 33
7 Mounting
7.1 Installation Position
Along with horizontal and vertical installation, all other installation positions are allowed..
Use an end stop in the case of vertical mounting!
In the case of vertical assembly an extra end stop has to be mounted underneath the
fieldbus node as an additional safeguard against slipping.
End stop clamps by WAGO see Chapter
7.2 Dimensions
NLC0 CLOG
NLC0 CS70 /
NLC0 CNF0
1
Depth
100 mm / 3.94 inch
100 mm / 3.94 inch
2
Width controller
102.5 mm / 4.035 inch
102.5 mm / 4.035 inch
3
Width 3 input clamps
36 mm / 1.417 inch
-
4
Width bus terminal clamp
12 mm / 0.472 inch
12 mm / 0.472 inch
5
Total width
150.5 mm / 5.925 inch
114.5 mm / 4.507 inch
Fig. 7-1
Dimensions NivuLink Compact (top view)
