Instruction Manual
NivuLink Compact
page 64
NivuLink Compact - Document revision 02 / 06.08.2020
14 Dismantling
CAUTION
Risk of personal injury
due to sharp edged blade contacts.
•
Handle input terminals and bus terminal clamps carefully.
CAUTION
Risk of equipment damage
due to working on live systems.
•
Disconnect equipment from mains power prior to working on the unit.
1
Top view locking disc
2
Fix lock
3
Release lock
4
Nose of locking disc
5
Releasing strap
6
Feed-in section (fixed component of controller, cannot be removed)
Fig. 14-1
Locking the controller
Removing the controller:
1. Rotate the locking disc using a screwdriver blade until the nose of the locking is no
longer latched behind the carrier rail.
2. Use the releasing strap to pull the controller out of the array.
By pulling the controller out the electrical connections between data contacts or
power contacts and the following input terminals are disconnected again.
Important Note
The feed-in section (Fig. 14-1, Pos. 6) is a fixed component of the controller. The enclosure
components are firmly connected to each other.
•
Do not separate enclosure components from each other.
