Chapter 9 User interfaces
All other modes
QU
Fastrecording (recording cycle = recording cycle / factor)
SL
Slow recording (recording cycle = recording cycle * factor)
RO
Switch on recording
RF
Switch off recording
XM
Initiate transmission
ON
Activate online mode
Level
Levels for initiating the trigger
Greater or
equal
The measurement value must be greater than or equal
to the level to initiate the trigger.
Less or equal
The measurement value must be less than or equal to
the level to initiate the trigger.
9.2.1.4 Calculated channels
Note:
The values of the calculated channels are calculated directly for the data output (display on Device to
Web server or download from Device to Web server). They are not saved in the server database.
9.2.1.4.1 Basis
Title 1-5
Freely selectable channel title for the calculated channels
Mode
Possible calculation modes for the calculated channels
Off
---
Calculated channel deactivated
Table
Min
Defines the lower scale end of the pointer instruments
Max
Defines the upper scale end of the pointer instruments
Unit
String, which is used as the measurement unit by all of the server display
elements
Decimal
places
Number of decimal places which are used by all of the server display
elements
Digital
Invert
Inverts the input signal
+, -, x, /
Min
Defines the lower scale end of the pointer instruments
Max
Defines the upper scale end of the pointer instruments
Unit
String, which is used as the measurement unit by all of the server display
elements
Decimal
places
Number of decimal places which are used by all of the server display
elements
Shifts element down
Shifts element up
NivuLog Easy - Rev. 05 as of 02.07.2012
53 of 73
