Note:
Additional explanation of "Digital" mode
Invert
Setpoint
Output on device
Off
Off
=
Off (low)
Off
On
=
On (high)
On
Off
=
On (high)
On
On
=
Off (low)
9.2.1.5.2 Config
Off
---
Ext warmup time
---
Frequency
---
PWM
---
Impulse
Duration
Duration of an output impulse
9.2.1.6 Internal channels
9.2.1.6.1 Basis
Voltage title
Freely selectable channel title for V
in
(external charging voltage)
Unit
String, which is used as the measurement unit by all of the server display
elements
Battery title
Freely selectable channel title for the internal battery or accu voltage
Unit
String, which is used as the measurement unit by all of the server display
elements
GSM level title
Freely selectable channel title for the GSM level
Unit
String, which is used as the measurement unit by all of the server display
elements
Int. temperature
title
Freely selectable channel title for the internal device temperature
Unit
Selection of the temperature unit that is used by all of the server display
elements
9.2.1.6.2 Alarms
Warning
Value low
A warning is initiated if the measurement value drops to or below this value.
Value high
A warning is initiated if the measurement value meets or exceeds this value.
Alarm
Value low
An alarm is initiated if the measurement value drops to or below this value.
Value high
An alarm is initiated if the measurement value meets or exceeds this value.
Hyst %
Hysteresis for all-clear (e.g. hyst = 5%, alarm or warning at 100 -> all-clear at 95)
56 of 73
NivuLog Easy - Rev. 05 as of 02.07.2012
