Chapter 9 User interfaces
Note:
Example for explaining the recording, measuring and burst cycles (in conjunction with the decay)
Basic setting
Recoding cycle
5 min.
Burst cycle
1 min.
Measurement cycle
15 sec.
Measurement channels ->
Config.
Decay
Med
Time
60 sec.
Measured value formation: The last four measurement values are used to determine the median and recorded
as the measurement value.
Note:
Additional explanation of the connection types
Connection type
Energy consumption
Data volumes
Response time
Online
Cycle & wakeup
Cycle
9.2.1.9 FTP export settings
Note:
This configuration section is only visible if the "FTP Agent Extended" licence for the Device to Web-
Server has been enabled.
FTP export profile off
FTP export deactivated
"Name of an
FTP export
profile"
List with the FTP export profiles that were created on the Device to
Web-Server (for creating an FTP export profile, see "Device to Web
Server Manual " - upon request).
Settings of the
selected profile
shows an overview of the most important parameters of the selected FTP export profile
FTP directory
makes overwriting the standard directory of the selected FTP export profile possible
9.2.2 Device configuration
Note:
Several of the configuration fields in the following sub chapters may possibly be hidden depending on the
respective user level. In this case, please contact the Device to Web-Server administrator.
NivuLog Easy - Rev. 05 as of 02.07.2012
59 of 73
