16
17
NOTE!
Maintainer Menu is detailed only in ‘Addendum to User manual’. If you need
assistance or have any warning or fault codes on your UPS screen, please contact
the technician that installed the UPS.
DO NOT
attempt to modify any settings of the UPS unless you are a trained
technician. This UPS carries lethal voltages. All repairs and service must be
performed by authorized personnel only.
3.2.1. Main screen
Upon powering on, the LCD will start initialization process that takes a few
seconds.
After initialization, the main screen will display as shown below. On the
bottom, there are five icons to represent five sub-menus: CONTROL,
MEASURE, SETTING, INFO, DATALOG.
Main screen
3.2.2. Control screen
Touch the icon
to enter control sub-menu.
Control screen
Touch the
icon to return back to main screen no matter it’s in any screen
of any submenu.
ON/OFF UPS
It will show “Turn on UPS?” when UPS is off.
It will show “Turn off UPS?” when UPS is on.
Touch “YES” to turn on or off the UPS. Then, the screen will return to main
screen.
Touch “Back” to return to main screen immediately or “No” to cancel this
operation and back to main screen.
Turn on UPS
Turn off UPS
Summary of Contents for Ranger 180KT
Page 25: ......
